Transport Dimension
- Width: -8 ft.
- Height: -9 ft.
- Length: -30 ft.
- Tongue Weight: -2950 lbs.
TC-50 Slinger Conveyor
Primary Conveyor
- 50'+ telescoping reach; additional 20' slinging distance
- 14" conveyor belt with vulcanized splice
- Tungsten Carbide belt scraper system for dependable belt cleaning
- Low operating height of 9'
- Belt rides on a troughing frame design with UHMW rails for reduced idler roller maintenance
- Maximum observed performance of 1.7y3/min or 100y3/hr
- Variable belt speed 0-100%
Feed Hopper
- Hopper is sized for dump trucks, skid steers, loaders, and more
- Hopper is able to accommodate 4" minus aggregate, dirt, topsoil, and concrete (up to 6" slump)
- Dual vibrators to keep material moving
Power
- Powered by a Teir 4 Kubota Engine with Danfoss hydraulic system
Chassis
- All-steel frame with expanded metal decking
- Full-access engine and control systems for ease of service
- Open and accessible routing for hydraulic and fuel hoses for ease of maintenance
- Electric over the hydraulic braking system
System Controls
- Remote control unit with proportional controls allowing for fine control
- Redundant manual controls available at operators station
- Independent variable speed control for feed and primary belts
Feed Conveyor
- 18" feed belt with mechanical splice
- Simple single-hydraulic actuation to transition from transport mode to operating mode
- Variable belt speed 0-100%
Operating Dimensions
- Max Reach _ 50 ft.+
- Min Pitch — -8°
- Min Reach — 23 ft.
- Rotation — 240°
- Max Pitch — 65°
- Dry Weight — 19,450 lbs.
Outriggers
- Hydraulic-driven, accommodating 5° parallel slope and 3° perpendicular slope
- Integrated rubber protective pads
Features
Mobility
When it comes to mobility, light and fast wins. The TC-50 can easily be towed behind any vehicle with a 21,000+ pound towing capacity.
Ease-of-use
A simple and logical control layout makes for a quick learning curve. All functions are clearly labeled allowing for an operator to go from learning to earning.
Durability
Built with many components found in the mining industry, the TC-50 allows for dependable operation with tried and true components.
Mechanic Friendly
All body panels surrounding the engine/control compartment can be removed to allow for the best possible access to complete service work.
Clean
Mining-grade Tungsten Carbide and polyurethane belt scrapers assure every ounce of material is placed where it belongs.
Versatility
The TC-50 is able to run everything from dirt to concrete, with virtually no change in machine setup – moving more than previously possible.
Coverage Area
9,000 square foot
From a single location the TC-50 reaches 4,000+ square feet of area; With an added 20 foot slinging distance, the coverage area is increased by 5,000 square feet.
